How to Update your Tabs Firmware

Looking for a full list of common questions? View our complete FAQ overview.

How to Update the Firmware on Your Dharma Dr. Tabs

Firmware updates help ensure your Dharma Dr. Tabs run smoothly and stay compatible with the latest app features. Follow these simple steps to check for and install an update using the Dharma Dr mobile app—no developer tools needed.

What You'll Need

• Your Dharma Dr. Tabs (charged and out of the case)
• The Dharma Dr app installed on your phone
• Bluetooth enabled and a stable connection

How to Update Using the Dharma Dr App

1. Take both Tabs out of the case and make sure they’re powered on (you should see a blinking blue light).
2. Open the Dharma Dr app and allow the Tabs to connect.
3. Once connected, tap the More tab in the bottom right corner.
4. Select Support, then tap Diagnostics.
5. If a firmware update is available, you’ll see an “Update” prompt at the top of the Diagnostics screen.
6. Tap Update and follow the on-screen instructions. Keep the app open and stay close to the Tabs during the update.

Note: If no update appears, your Tabs are already running the latest firmware version.

⚠️ Tips if the Update Fails

• Return the Tabs to the case, factory reset them How to Perform a Factory Reset
• Make sure they pair together again, then to your device.
• Keep your phone within a few feet of the Tabs the entire time.
• If you're still stuck, contact our support team and we’ll help troubleshoot.

✅ How to Check Your Current Firmware Version

1. With Tabs connected, go to More > Support > Diagnostics in the app.
2. Your current firmware version will be displayed there.
3. Compare it to the latest version listed in our firmware changelog.