Cycle Count Tracking

The Cycle Count Tracking feature lets you measure the exact number of bilateral stimulation cycles completed during a session. This provides greater precision when working with a therapist or following a structured protocol.

Steps

1. Open the Dharma Dr app
   Ensure your Tabs are powered on and connected via Bluetooth.
2. Go to Advanced Settings
   From the main screen, tap 3 dots menu in upper right and find Cycle Count.
3. Enable Cycle Count
   Toggle the setting on to begin tracking during your session.
4. Start your session
   As your session runs, the app will count each complete left–right pass as one cycle.
5. Review results
   At the end of your session, the total cycle count will be displayed on the summary screen.

Troubleshooting

• No cycle count displayed — Make sure the feature is enabled in Settings before starting your session.
• Numbers don’t seem accurate — Confirm both Tabs are connected properly. If one Tab disconnects, the count may be off.
• Feature missing — Update the Dharma Dr app to the latest version to ensure full functionality.

Tips & Best Practices

• Use cycle count when following protocols that call for a set number of passes.
• Pair with Auto Stop to end sessions after a chosen number of cycles.
• Track cycle history over multiple sessions to measure consistency.

Related Articles

• Auto Stop Settings
• Session Timer Settings
• Troubleshooting – Complete Guide