How to Pair Your Dharma Dr. Tabs

Modified on Mon, 9 Jun at 1:31 PM

How to Pair Your Dharma Dr. Tabs

Category: Setup & Pairing → Getting Started

What This Covers:

Automatic pairing process
Manual Bluetooth pairing (if needed)
LED light meanings
Troubleshooting tips

Step-by-Step Pairing Instructions

1. Start with Charged Tabs

Place the tabs in the charging case.
Charging Case LED Indicators:
- Flashing Yellow = Charging (battery below 90%)
- Solid White = Fully charged and connected
Once fully charged, remove both tabs from the case.

2. Wait for Automatic Connection Between Tabs

The tabs will pulse white while connecting to each other.
Once connected, the LEDs will turn solid white.

3. Pair with the App Automatically

Open the Dharma Dr. app and go to the Tabs control screen.
A pairing request will appear — confirm it.
The app will show “Connected.”

Manual Pairing (If Auto-Pairing Doesn’t Work)

Open your phone’s Bluetooth settings and delete any “Dharma Dr.” devices.
Restart the app and return to the Tabs control screen.
Press and hold the tab button for 3 seconds to trigger blue blinking.
You should now receive a new pairing request in the app.

LED Light Meanings

LED	Meaning
Pulsing White	Tabs are connecting to each other
Solid White	Tabs connected and ready to pair with app
Blinking Blue	Manual Bluetooth pairing mode
Flashing Yellow (Case)	Charging — battery below 90%
Flashing Red	Factory reset mode — must be active on both tabs

Troubleshooting Tips

Only one tab connects? Put both tabs back in the case, wait 10 seconds, then try again.
Tabs won’t power on? Hold the power button for 5 seconds, or see our "Tabs Won’t Turn On" guide.
Still not pairing? Follow the manual pairing steps above or review our Bluetooth troubleshooting article.

Related Articles

Still need help?

If your question wasn’t answered here, you can submit a support ticket and our team will get back to you soon.

Contact Support