Charging & LED Lights – Complete Guide

1. Battery Life

• Tabs last approximately 4–6 hours of active use on a full charge.
• Battery life may vary based on vibration intensity and frequency of use.

2. How to Charge the Tabs

• Place both tabs into the included charging case. Ensure they are seated properly.
• Use the provided USB cable to connect the case to a power source.
• Charging typically takes about 1.5 to 2 hours for a full charge.

3. Charging Case LED Indicators

Note: These lights are located on the charging case, not the tabs themselves.

4. Battery Health Tips

• Avoid letting tabs stay fully depleted for long periods.
• Store the tabs in the charging case when not in use.
• Use only the official Dharma Dr. charging cable for best results.

Dharma Dr. tabs use a series of LED lights to communicate power, pairing status, charging progress, and session activity.

LED Meanings – Tab Status

• White (Pulsing): Pairing Mode
• White (Solid): Standby Mode
• Teal Blue: App Mode (ready to start)
• Green → Blue → Fuchsia → Teal: In Session (color changes with speed/intensity)
• Red (Solid): Factory Reset Complete
• Off (No Light): Powered off or idle in case

LED Meanings – Charging Case

• Orange (Slow Pulsing): Charging (battery under 90%)
• Green (Solid): Fully charged (90%+)

How to Enter Bluetooth Pairing Mode

• Hold down the tab with the ~ (tilde) symbol for about 4 seconds
• The LED will pulse white = Bluetooth pairing mode

Troubleshooting Charging Issues

• Case not charging? Make sure the USB cable is firmly connected and try another port or adapter.
• Tabs not showing lights? Check if they’re seated properly and the case has power.

Unusual LED Behavior?

If your tabs are flashing unexpectedly or not responding:

• Try restarting the tabs
• Perform a Factory Reset
• See related guides: Tabs Won’t Turn On, Tabs Not Pairing